Esse Engineering BakeHeart, Manual

Page: 101 / 161

OMNI-Test Laboratories, Inc.
Manufacturer:
Model:
Run:
Category:
BR – Dry burn rate, kg/hr
V
s
– Average gas velocity in the dilution tunnel, ft/sec
Q
sd
– Average gas flow rate in dilution tunnel, dscf/hr
V
m(std)
– Volume of gas sampled, corrected to dry standard conditions, dscf
m
n
– Total particulate matter collected, mg
C
s
- Concentration of particulate matter in tunnel gas, dry basis, corrected to standard conditions, g/dscf
E
T
– Total particulate emissions, g
PR - Proportional rate variation
PM
R
– Particulate emissions for test run, g/hr
PM
F
– Particulate emission factor for test run, g/dry kg of fuel burned
Equations and Sample Calculations – ASTM E3053 & E2515
ESSE
WarmHeart
2
Low
are provided for each equation. The raw data and printout results from a sample run are also provided for
Equations used to calculate the parameters listed below are described in this appendix. Sample calculations
comparison to the sample calculations.
Control No. P-SSAR-0003 Low Burn Run 2
101 of 161