D2SENSE BEEPER 100
Alarming Function
The alarming is permanent if the BEEPER has been recognized
within the direct surrounding of a KEEPER. (
Danger Zone 1
).
The
Danger Zone LEDs
, the
vibration alarm
and the warning
sound inform the user that the current BEEPER device has been
recognized within the danger zone of a KEEPER unit
Get into
visual contact with the machine driver immediately!
Wearing the BEEPERs
The BEEPER may be worn at
the front pocket, the belt or the
helmet:
Die Verbindung kann nur durch einen Neustart des KEEPERs
aufgehoben werden
Coupling of BEEPER and KEEPER
The coupling push-button
of the KEEPER is pressed
for 3 seconds.
The
coupling
LED
flashes and the BEEPER
may be connected.
Press
the
coupling
push-
button for 3 seconds, until the
Operation- and Charge Level
LED flashes.
After a successful coupling the
BEEPER does not react on the
KEEPER anymore and the
coupling LED of the KEEPER is
illuminated green.
Battery Charging
The coupling connection can only be canceled by a restart of
the KEEPER (complete activation/deactivation) !
Step 1: Lift the protection cap
and move it to the left or to
the bottom.
Top Site
Step 2: Connect the micro
USB charging cable to the
BEEPER receptacle.
During charging the Charge
Level LED is continuously
red. If the LED is continuously
green,
the
charging
procedure is completed.
3
Attention:
The movement paths must be
checked
at
all
times
independent of the alarming
function!
St
an
d
0
1
/2
0
1
4
See over
1
2
4
