6
STEP 3:
1.
Secure Seat (19) on the sliding seat carriage by using Combination M5 Allen
Wrench & Phillips Head Screw Driver (68) to tighten 4pcs of M6 × 35L Phillips
head screws (55).
2.
Install Seat Handle Bar (7) on the sliding seat carriage by using M6 L Allen Wrench
(92) to tight 4pcs of 3/8" × 1-3/4" Button Head Socket Bolts (61), going through
Seat Handle Bar (7) and 4pcs of 3/8" × 19 × 1.5T Flat Washers (62), then use
14.15m/m Wrench (69) to tighten 4pcs of 3/8" × 7T Nyloc Nuts (63).
3.
Install Seat Back Bracket (3) on the Seat Handle Bar (7) by using M6 L Allen
Wrench (92) to tight 2pcs of 3/8" × 1-3/4" Button Head Socket Bolts (61), going
through Seat Back Mounting Plate (54) and 2pcs of 3/8" × 19 × 1.5T Flat Washers
(62), then use 14.15m/m Wrench (69) to tighten 2pcs of 3/8" × 7T Nyloc Nuts (63).
4.
Connect the hand pulse connector (94,95) as shown in the inset picture below.
Summary of Contents for ESP0037 R6 Recumbent
Page 20: ...19...
