5
STEP 2:
1.
Use the M5 Allen Wrench (68) to secure the front and rear stabilizers (5, 6) on the
mounting brackets with three 5/16" × 3/4" Button Head Bolts (32), 5/16” split
washers (35) and 5/16” flat washers (33).
2.
Use 14.15m/m Wrench (69) to tighten the pedals (15 left and right) on the crank
axle. The left pedal is a reverse thread and will screw in a counterclockwise
direction. The pedals are marked with an R or L on the end of the threaded pedal
axle. Make sure to tighten the pedals firmly or a clicking noise can occur during
pedaling. It may be necessary to retighten the pedals after use if clicking occurs.
Summary of Contents for ESP0037 R6 Recumbent
Page 20: ...19...
