Energy saving mode /
Programming the amount of water
7.
Energy saving mode
Switch to long ready mode
8.
Programming the amount of water & coffee
Note
‧
The capsule may stick in the opening if it has been
there for a long time. If so, open and close the
operating lever. If the capsule is still blocked, push
down lightly with a finger.
‧
Various kinds of coffee (including decaffeinated)
capsules are available.
‧
For Hygiene reasons, we recommend filling the
water tank with fresh water, emptying the capsule
container and drip tray every day.
Tips
‧
Use thick, pre-heated cups for espressos in order to
prevent cooling down too quickly. Cups can be pre-
heated by rinsing them with hot water.
Caution
To avoid damaging your machine, never use other
makes of capsule.
If the machine is not being
used, after 5 minutes the
energy saving mode is
activated, the voltage
absorbed by the machine
falls to
≤
0.5 Watt. The
energy saving mode is
indicated by the dispensing
button
lighting up in
green.
To use the machine press one
of the dispensing buttons.
The machine is ready to
dispense coffee as soon as
the buttons are steadily lit up
in blue.
If the machine is not used for
an extended period of time
(for example during holidays),
switch off the machine,
empty the water tank and
pull the power plug out of
the power source.
Switch off the machine
and close the metal
handle.
Switch on the machine
while pressing the
button . Keep the
button pressed until it
glows blue. The
machine will now stay
in Ready Mode for
max. 4 hours.
To return to the normal
energy saving mode
please switch on the
machine while pressing
the button
. Keep it
pressed until it glows
blue.
With the ESPRESSOTORIA
®
Barista™ 2.0 Automatic
capsule machine you can
program the amount of
water for these 4 dispensing
buttons:
For button or
‧
Hold down the button to
be programmed (for
example for button
)
until it starts to flash blue
rapidly (around 3 seconds).
The dispensing cycle
commences.
‧
Once the desired amount
in the cup has been
obtained, press the button
again. The dispensing
process stops, the amount of
water is programmed and
four buttons light up.