ESPER TriggerBox, User Manual, Page: 23 / 38

p Prints "Version x.x" referring to firmware.
Sequencer Specific Commands:
Command Description
Y Move to next enabled sequencer stage, or wrap round to zero stage
if at the final activated stage.
j3 Moves the sequencer to its 4th stage (zero start index).
J Print "STG_NDX:[3]".
P Activate the next available sequencer stage. Prints
"ERR:tooManyActiveStages" if eight stages are active.
U Deletes current stage. Subsequent stages, if present, move to fill
the gap. Prints "ERR:notEnoughStages" if only one stage is active.
W Print "NM_ACTV_STG:[1]" (number of active sequence stages).
w Print the sequencer in easy to read format.
T Reset the sequencer to default.
22