Supra-5000 Digital Cinema and Secured Media Projection System Quick Start Guide
May 19
th
, 2021
From the Supra-5000 Command Center interface, click the Laser On toggle button on the top menu
bar to switch on/off
the projector’s Laser Light Source
.
The Laser power
adjustment can be done
from the
‘Light Source
Information’ section on the
Home screen, by clicking on
the icon shown below:
⑩
Projector Alignment
⑪
Creating a Custom Macro
From the Installation
→
Macro Settings menu, you can edit the settings for an existing macro OR create a
new custom macro by importing the relevant PCF, Screen, Color, Light Source and Lens files.
A.
Projecting a Test
Pattern
⑨
Switching On/Off the Laser
✓
Physically adjust the position of the screen so that the projected image fits on the screen.
You can use to adjustable feet of the projector to raise or lower its height in order to align
the projected image on the screen.
✓
You can also modify a lens file from the Supra Command Center and make adjustments to
the projected image on screen using the Lens Shift, Lens Zoom and Lens Focus functions.
The modified lens file can then be applied to a macro which corresponds to the format of
the content being played.
You can use the Test Pattern option to check the alignment of the projected image on the screen.
B.
Performing Physical and Optical Adjustments
A Macro is a preset that recalls
appropriate projector settings so
that the source image is displayed
correctly on the screen.
