PLATINOUS SERIES CONTROLLER MANUAL
18
[Input & Edit Screen]
4.
To edit existing programs, display the step to be edited with the page scroll buttons and press
the Step No. box of that step. Steps can be selected from step No. 1 to one number higher
than the last step. When creating a new program, this screen is not displayed.
Proceed to step 5 of this procedure.
Page Scroll
Buttons
Step No.
Boxes
5.
The PGM Detail screen will be laid over the display. Input the target temperature (& humidity)
from there.
Pressing the field boxes next to Temp. SP and Hum. SP lays a keypad over the screen to
enable input. Make you input from there.
* If OFF is displayed next to Hum. SP, the target humidity cannot be set. Turning humidity
control ON will enable input.
6.
Turn humidity control ON/OFF as needed. (For temperature & humidity chambers only).
Press the
m
ON box next to Hum. Control to make the setting.
When dot is yellow:
Humidity control is ON.
When dot is black:
Humidity control is OFF.
Summary of Contents for SCP-220
Page 1: ...SCP 220 CONTROLLER INSTRUCTION MANUAL...
Page 2: ......
Page 38: ...PLATINOUS SERIES CONTROLLER MANUAL 34...
Page 69: ...PLATINOUS SERIES CONTROLLER MANUAL 65...
