Programing a group of fobs or cards
Enter programing mode.
1. All tags to be programed as a group must have consecutive
numbers.
2. Press the * key then the 9 key the yellow light will flash
3. Press the 0 key then the 1 key the unit will bleep once.
4. Enter the number of the first available location in the range of
000 to 999.
5. Now enter in a 3 digit format how many tags you want to
programme (xxx) into the system, present the lowest number
tag to the reader ( ) and remove. Alternatively enter the 8 digit
number of the lowest number Tag from the group to be
programmed into the keypad.
To confirm the programming has been successful 2 bleeps will
be heard.
Press # to exit the setting mode.
Set door open time
1. Enter programming mode.
A Long bleep will be heard and the blue power LED will turn
yellow.
2. Press the * key then the 1 key the yellow LED will start to flash
3. Enter the time in seconds for the unlock time from 00 to 99
seconds.
Press # to exit the setting mode.
The tamper alarm
The built-in buzzer will sound a continuous Bleep Bleep. If the
photoresistor sensor is directly exposed to the light. The buzzer
will turn off automatically after 60 seconds, or when the light is
no longer detected, or by entering the programming code.