How to enter programing mode
Factory default programming code is 1234.
Input the programming code twice (1234 and1234), the yellow
LED will be on. To exit programming mode press # button.
Programming a fob or card
Note:- Do not have Tags in your hand or close by when pressing
keys.
EZ-PROX has 1000 locations available from 000 to 999.
1. Enter programming mode the blue LED will turn yellow.
2. Enter the location you want to programme the Tag to in a 3
digit format (xxx). A green light will show the location is empty
and ready to present a tag if a red light is present this location
is already in use. To delete this location press the star * key
twice. The LED will now turn green.
3. Pick up one Tag only and present it to the bottom of the reader
( ) and remove. A bleep will be heard this means the card or fob
is added. If further Tags are to be programmed select the next
available location number (xxx)
Deleteing a fob or card
Enter programing mode.
Enter any 3-digit number from 000 to 999 (yellow light will blink
during this process): if the LED changes to red there is data stored,
green shows the location is empty. Press * twice to delete the
stored location.
Press # to quit setting mode.