Make sure hinges are
mounted in the same line.
1mm
2
2
Blind Nut (6mm)
Screw(6x50mm)
1
Stab joiner (16x230mm)
2
Steel wire (0.5x3000mm)
1
U-style wire (3mm)
Pin hinge(24x24mm)
1
Nose arm(3mm)
Collar (3mm)
2
1
1
Tail landing gear(3mm)
Tail wheel (45mm)
Clevis
3
1
Retainer
Rod (2X257mm)
1
TP Screw(3x20mm)
Washer (3x6mm)
4
4
7
4
TP Screw (2.3x12mm)
3
Pin hinge(2.5x48mm)
2
1
Steel wire (0.5x3000mm)
Steel wire (0.5x3000mm)
U-style wire (3mm)
connect the fullarm for elevator with steel wire as below.
Elevator
6.2mm
Blind Nut
Tailing
edge
Make sure they are in
the right position while
installing.
4
Pin hinge(24x24mm)
100 mm
5 mm
6mm
4
Matal douel (4x30mm)
1
Rib template (2mm ply)
Assemble the wings to the fuselage with screw and blind
nut as below.
Drill holes to relevant position in the fuselage.
Apply instant type CA glue to elevator and pin hinge.
Keep some space about 1mm width between
elevator and tailing edge.
Accessory list for the coming installation steps.
23
22
25
26
5
24
Ply(15x15x3mm)
1.5mm
5
TP Screw (2.3x8mm)
5
Epoxy plies
7
TP Screw (2.3x8mm)
1.5mm
12
Ply(15x15x2mm)
12
TP Screw (2.3x8mm)
1
Canopy
2
PVC
1
Epoxy the belly pant to wing .
2
Plastic tube (5x50mm)
1
Dummy bomb
Fiber plate
Assemble the canopy to the fuselage with TP.
Trim the cowling for engine and muffler.
Epoxy plies to relevant position inside the fuselage as
below for assembling the cowling.
Cut away the surplus parts of canopy and PVC parts
carefully along the shade line.
64
65
63
12
66
62
Accessory list for the coming installation steps.
