Main wing joiner
1
Securely glue together. If coming off during flights, you 'll
lose control of your airplane which leads to accidents!
100mm
18 mm
2
Wood dowel (6x50mm)
6mm
B = B '
A = A '
Drill 6.2mm holes at the place
of main wing.
Install the wing to the fuselage
with 6x50mm screws as shown
in the diagrams below.
A`
A
B`
B
Drill holes at appropriate position in the wing
for taking the air line and the servo line out.
Connect the wings with main wing joiner.
Drill holes in the wings and set the wood dowels
in them as below.
Assemble the wings.
6mm
2
Wood dowel (6x30mm)
1
Rib template (2mm ply)
Rib template (2mm ply)
According to the rib template drill holes in one wing and
epoxy wood dowel in them.
Rib template (2mm ply)
6mm
According to the rib template drill holes to another
main wing.
17
18
19
20
21
4
16
Wooden Block(43x28x26mm)
1
Gear door
2
4
Collar (5mm)
Wheel (100mm)
Landing gear(5mm)
2
1
8
2
TP Screw (3x20mm )
Landing gear straps
4
TP Screw (2.6x14mm)
8
Washer (3x6mm)
4
Wooden Block(25x15x13mm)
25mm
3mm
decal
5mm
Drill two holes to appropriate in the drop tank.
2
Plastic tube (5x50mm)
Plastic tube (5x50mm)
Epoxy the plastic tubes in the holes tightly.
Please notice the datas below when assemble
the drop tank.
145mm
30mm
20mm
5mm
Epoxy the PVC part to the appropriate position in wing
carefully as below.
67
69
70
68
71
67
13
Accessory list for the coming installation steps.
