Plug the part
④
of power supply line into ES310 power supply port (chapter 1
③
)
3.2.2 Connect ES310 to the Vehicle
Power lines, it can connect with cigarette lighter or OBD
I/O line, connects terminal with the I/O connector of wire harness.
For the detailed description, please refer to chapter 4.
3.3 Step 3: Power On
When finishing installation, as long as power supply line is connected with cigarette lighter or
OBD, ES310 is powered on and starts work.
Note: If ES310 is connected with cigarette lighter, then only the car is ignition on, cigarette lighter
will has voltage. That means, ES310 can be powered on.
(cigarette lighter)
(OBD)
Then, please check LEDs status.
Summary of Contents for ES310
Page 19: ...Figure 7 Add Device Pop up ...
