16
6.3
ENTER RELAY SET VALUE
Your device has two relays in total with two contacts, normally open and normally closed.
You can use the relay contacts in five different functions depending on your need. These
functions are described in 6.4.1
6.3.1
Relay 1 Output Settings (OUT-1)
Note: You can also set relay 2 output setting in the same way.
6.3.2
Changing Quick Set Values
Press and hold the ESC key to quickly change all adjustable setpoints while the device is in
run mode. You can then change the desired SET value by pressing the PRG key. When
entering a value, press and hold the UP and DOWN keys to move to the next step. To enter a
negative (-) value, press the DOWN key to come to one of the non-digitized steps.
(Press and hold the PRG key
while the unit is in operating
mode)
.
The decimal point
starts flashing. Use the
UP and DOWN keys to
select the decimal
point.
Press and hold the UP and DOWN
keys to move to the next step. To
enter a negative (-) value, press
the DOWN key to come to one of
the non-digitized steps.
The value in the
second line starts
flashing. Enter the
desired value using
the UP and DOWN
keys.
.
.
The new SET-1 value you confirmed with the PRG key has been
set. You can return to run mode with the ESC key.
