10
Kongsberg XP
10.
System Setup
10.1. Introduction
This chapter will explain functions and parameters that are important for the
XP system
to run
properly.
It is a supplement to the information available from the
User Manual for i-cut Production Console
.
Examine each step carefully to ensure proper settings:
One time adjustments completed at the factory
The functions are included here as a reference.
They are not used during normal operation.
If necessary, they should be repeated, as indicated in the function description.
1
2
3
Adjust Measuring Station Position
4
5
6
7
Calibrate Foot on Measuring Station
8
9
Adjustments to customize the table
1
2
52
