10
Kongsberg XP
Use this wizard to establish the
Main Reference Point
(R).
Typical use is after maintenance or repair, if the
Main Reference Point
has been accidentially moved.
The
Main Reference Point
is a fixed position on the
Cutting Table
marked as a cross of drilled holes.
10.7.
Map Table Top Surface
Machine Connection
->
Machine Configuration
->
Installation
_>
Map Table Top Surface
To assure correct
Cutting Depth
, the surface of the
Table Top
is measured in order to create a map.
It is recommended to execute this function if the
Cutting Mat
is worn out and after the
Cutting Mat
has
been replaced.
Procedure:
1.
If the table is equipped with a
Conveyor Belt
, move the belt junction away from the table surface.
2.
Execute the
Map Table Top
function.
3.
Follow the instructions given by the wizard.
55
