- 7 -
Lighting Instructions - Standard Models (Fig. 6)
•
Open the main gas valve.
•
Push in the gas control knob from
z
(Off) and turn it to
(Pilot) position
(Fig. 6).
•
Depress knob and, after five seconds, push in the ignitor button.
•
Observe through the view port if the pilot is lit. If not, repeat the previous
operation.
•
Keep control knob depressed for 20 seconds before releasing. Turn control
knob to the desired position
(Maximum) or
(Minimum).
•
To turn off the heater, turn control knob to position
(Off) and close the
main gas valve.
Fig. 6
Lighting Instructions Thermostatic Models (Fig. 7)
•
Open the main gas valve.
•
Push in the gas control knob from
z
(Off) and turn it to
(Pilot) position
(Fig. 7).
•
Depress knob and, after five seconds, push in the ignitor button.
•
Observe trough the view port if the pilot is lit. If not, repeat the previous
operation.
•
Keep control knob depressed for 20 seconds before releasing.
•
Turn control knob to the desired position
TE
position.
•
To turn off the heater, turn control knob to position
(Off) and close
the main gas valve.
•
Never turn the Control Knob in positions between
(Pilot) and
TE
.
Thermostat Knob Operation
This knob must be positioned to the desired ambient tempertature. As a
reference the usual temperatures for home heating are from 20 ºC to 24 ºC.
