background image

 

2

 

   

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

CAUTION: The apparatus shall not be exposed to dripping or splashing and that no objects 

filled with liquids, such as vases, shall be placed on the apparatus. 

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, 

DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE 

PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE 

PERSONNEL.

WARNING:

 TO PREVENT FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS 

APPLIANCETO RAIN OR MOISTURE 

CAUTION:

 TO PREVENT ELECTRIC SHOCK, DO NOT USE THIS (POLARISED) 

PLUG WITH AN EXTENSION CORD, RECEPTACLE OR OTHER OUTLET 

UNLESS THE BLADES CAN BE FULLY INSERTED TO PREVENT BLADE 

NOTE: 

Some 

ESI

 products are equipped with dual or multi-voltage transformers 

(which are indicated on the back panel). Before you plug in the power cord, please 

check the AC voltage selector on the back panel of this product and make sure the 

voltage selector is set correctly. 

 

The lighting flash with arrowhead, 
within an equilateral triangle, is 
intended to alert the user of the 
presence of uninsulated “dangerous 
voltage” within the product’s enclosure; 
that may be of sufficient magnitude to 
constitute a risk of electric shock to 
person 

 

The exclamation point within an 
equilateral triangle is intended to alert 
the user of the presence of important 
operating and maintenance (servicing) 
instructions in the literature 
accompanying the appliance. 

 

CAUTION: The apparatus shall not be exposed to dropping or splashing and that 

no objects filled with liquids, such as vases, shall be placed on the apparatus.

 

Summary of Contents for SW10K eXperience














Reviews: