10
Technical Specifications
- Type:
Powered Subwoofer
-Subwoofer Driver:
10" black paper cone with high temperature voice coil and damped
rubber surround.
- Frequency Response:
30Hz - 180Hz, Adjustable 50Hz – 180Hz
- Amplifier Power:
100W@100Hz, 4 ohm, 0.1% THD
-
Dynamic Power
: 120W
- S/N Ratio: >
100dB below full output
- Input Connectors:
2 x XLR R/L Balanced Input Connector
2 x TRS Balanced/ Unbalanced Input Connector
-Output Connectors:
2x XLR Balanced output for Satellites
1x XLR Balanced output for Extra Sub
- Controls :
Level, Phase, Subwoofer Frequency, Satellite Frequency
- Switches :
Power On/Off slide switch,
L&R XLR Outputs “HPF Bypass” On/Off Slide Switch.
-
Input Impedance
: 20K ohms balanced, 10K ohms unbalanced
-
Input Sensitivity
: 150 mV input produces full output with Input Sensitivity control at
maximum.
-
Protection
: over temperature, shorting, an external main fuses.
-
Indicators
: Power ON (Red)/ Protection (Red) /Operation(Green)
- Power Requirements
: Factory programmed for either 115V ~50/60Hz,
230V~50/60Hz or 100V~50/60Hz;
Power via detachable 3 circuit line cord.
-
Cabinet
: vinyl laminated MDF
- Dimension (unit):
384mm(H) x 354mm(W) x 384mm(D)
-
Dimension (Shipping Carton)
: 492mm(H) x 488mm(W) x 458mm(D)
- Net Weight:
12.5 Kg (27.5 lbs) /unit (without packing)
-
Shipping Weight
: 16.5 Kg (36 lbs) /unit (with shipping carton)
Remarks: Above specifications are subject to change without notice.
