•
LINE OUTPUTS
4.
Balanced Line-Out channel
: 1 ’LEFT’ and 2 ’RIGHT’. Controlled with
the "Master" volume control 11 on the front side of the device.
•
LINE
•
MIC
•
HI-Z INPUTS
5.
Input channel XLR-/1/4" -Combo jack
: 1 ’LEFT’ and 2 ’RIGHT’. This
is for either LINE (XLR or TRS), MIC (XLR or TRS) or HI-Z (TS, 1/4"
Mono-audio jack). Depending on the current selected input the input is bal-
anced or unbalanced.
2 Additional Software
To use planet 22x, you need additional software from Audinate.
2.1 Dante Virtual Soundcard (DVS)
a license for one DVS is included and inside of the box. Please download the most
current version of the DVS from the Audinate website:
https://www.audinate.com/products/software/dante-virtual-soundcard
and install the software to you Mac or PC. Insert the license key and start the application.
More detailed instructions, tutorials and settings are available on the Audinate website.
2.2 Dante Controller (DC)
To use the audio signal from or to the computer you must connect the Transmitters
with the Receivers in the Dante Controller software. Please download the most current
version of the Dante Controller from the website from Audinate:
https://www.audinate.com/products/software/dante-controller
and install the software to your Mac or PC. For this software no license key is required.
Detailed how to and more instructions of all settings are also available on the Audinate
website.
3 Using the device
To run the planet 22x you must connect the inputs and outputs inside of the Dante
Controller software. For this you must connect a "Dante Receiver" with a "Dante Trans-
mitter". For example to receive the physical channel 1 of the planet 22x at the channel 1
of your Virtual Audio Soundcard, you must connect the Transmitter "planet22x LEFT
1" with the "Receiver: Controller-PC 01".
6
