ESI
Juli@ XTe
15
Windows will now prompt you to confirm the Windows Logo testing in the
Hardware Installation
dialog with
Continue Anway
before the driver installation proceeds. After some time, the
installation of the
ESI Juli@ XTe Controller
device will be completed and you need to click
Finish
.
Once this is done, the
Found New Hardware Wizard
will automatically appear again. Please follow
the exact steps one more time, this time to install the
ESI Juli@ XTe Audio
device. After that is
finally confirmed on the last dialog via
Finish
, the Juli@ XTe driver software has been completely
installed. To confirm this, please check if the ESI icon is displayed in the taskbar notification area
as shown below.
If yes, the driver installation has been completed successfully. Note that on some systems the
computer has to be rebooted (Windows will display a message in that case) before everything is
completed.
Windows Vista & 7
Turn on your computer. Windows will automatically detect a new device installation and the
Found
New Hardware
window will appear as seen on the following picture.
Select
Locate and install driver software (recommended)
. Insert the driver CD only if you are
installing the original driver from the CD. If you are installing an updated driver from our website,
proceed by clicking on
I don’t have the disc. Show me other options.
on the following dialog.
