ESI ESRTP5, User And Installation Instructions Manual

Page: 13 / 32

8
LIGH setting range: Off/On. Default: Off
N.B.
It is recommended to leave this setting in the default OFF
mode as heat generated by the thermostat’s power supply and LED
will affect temperature measurement. A deviation of up to 3.5 °C
may occur, which will be calibrated automatically by the unit within
30 minutes of first connecting the thermostat. It is recommended to
leave the thermostat to climatise for 40 minutes before user opera-
tion. If set permanently ON, the light will automatically switch to a
lower light setting and be dimmer.
4.3. Resetting the Unit (rESE)
Resetting the unit will return the thermostat to default setting. The
time, date and landlord service settings will all be maintained.
1.
2.
Press and hold
>
until the display shows tINE . Turn the dial
until display shows rESE then press
>
The display will show
- - - -
. Press
>
again to confirm and the
display will show LOAd . If the reset is successful, the unit will
return to the homescreen after 2 seconds. If the reset is
unsucessful, the unit will display FAIL . Either press
>
to
attempt again or press
<
to return to the previous menu