ESI ESRTP5, User And Installation Instructions Manual

Page: 25 / 32

8.2 Menu Technical Settings (tEcH)
1.
2.
19
Press and hold
>
until the display shows tINE . Turn the dial
until display shows tEcH then press
<
&
>
together to enter
Use the dial to choose between the below, then press
>
to
enter:-
dS : Delayed Start. Default is OFF. Use the dial to choose
between OFF (function disabled) or ON (heating on time is
delayed up to 40 minutes according to current room tempera-
ture)
tPI : TPI. Default is OFF. Use the dial to choose between OFF
(function disabled), 3CYC (each hour has 3 heating cycles,
recommended for oil boilers) or 6CYC (each hour has 6 heating
cycles, recommended for gas boilers)
SUG : Swing. Default is 1.0. Use the dial to choose between
0.5-2.0
AdJ : Temperature calibration. Default is 0. Use the dial to
choose between -3.0
o
C - 3.0
o
C
noP
: Number of time and temperature events. Default is 6. Use
the dial to choose between 4 or 6 time and temperature events.
SEr : Landlord Service Interval. Default is OFF. See section 9
to amend