ESI ES1247, User And Installation Instructions Manual

Page: 9 / 24

Programming the Unit
Fig. 1
4
To change the Programme times
1. Press the SET button (1) four times until the programme icon (2)
flashes, and the first ON time appears.
2. Press the +/- buttons (3) to adjust the ON time. Please note, the
time will change quicker if pressed continually.
3. Press the NEXT button (4). The display will now show 1 OFF (5).
4. Press the +/- buttons (3) to adjust the OFF time. Please note, the
time will change quicker if pressed continually.
5. Press the NEXT button (4) to access the remaining ON/OFF
periods and adjust in the same manner as above.
6. To return to RUN mode, press the SET button (1) until the display
indicates RUN on the display.
N.B: Programming is in 10 minute segments.
(1) (3)
(5)
(2) (4)