15
Switch on mains supply. Referring to the user guide:
1. Use the buttons to ensure correct product functionality.
2. Set timing and programme details in accordance with customer
requirements.
3. Normally unit will be left with channel in ‘Auto’ mode.
4. Set backlight either permanently ON or OFF in accordance with
customer requirements (refer to Setting the Backlight, page 9).
5. Leave these installation instructions with customer for reference.
Fitting the Programmer
Loosen the two ‘captive’ retaining screws on the
bottom of the back plate.
Now fit the programmer to the back plate, ensur-
ing the lugs of the back plate engage with the
slots on the programmer.
Swing the bottom of the programmer into
position ensuring the connection pins on the back
of the unit locate into the terminal slots in the
back plate.
Commissioning
Tighten the two ‘captive’ screws to fix the unit securely.
Summary of Contents for ES1247
