ESI ES1247, User And Installation Instructions Manual

Page: 8 / 24

Introduction to the 1 Channel Programmer
Programming the Unit
The Factory-Set Programme
This is the factory-set programme built into the unit. If the user
changes from the factory-set programme and wishes to return to it,
pressing the reset button with a non metallic pointed tool will return
the unit to the factory-set programme. NB. Every time the reset is
pressed, the time and date must be set again (page 8).
If the unit is installed as a 24 hour programmer the built in
programme will be the same for each day (i.e. Sat-Sun be same as
Mon-Fri above).
Changing The Programme (refer to Fig.1, Page 4)
For 7 Day Programmer Option - the initial programme displayed will
be for Monday. You can go to any day of the week by pressing the
DAY button repeatedly. The COPY button will copy the current
programme onto the next day. NB. It is not possible to copy Sunday
to Monday.
For 5/2 Day Programmer Option - the initial programme displayed
will be for Monday - Friday. Press the DAY button for Saturday -
Sunday programme. The COPY button will copy the current
programme onto the next day group. NB. It is not possible to copy
Saturday-Sunday programme to Monday-Friday programme.
For 24 Hour Programmer Option - the built in programme will be
the same for each day. The COPY & DAY buttons have no effect if
installed as a 24 hour programmer.
3
Configuration
2PU & 2Gr
Configuration
3PU & 3Gr
Mon-Fri Sat-Sun