DuaFire
ESI
You will now be prompted to switch on the hardware on the next dialog that is shown below on the
left. Plug in DuaFire and switch on the unit with the power switch. Do not click
Next
yet. The
Found New Hardware Wizard
will appear after DuaFire gets detected (as shown on the right).
Keep the selection on
Install the software automatically (Recommended)
and click
Next
. Windows
will again prompt you to confirm the Windows Logo testing dialog with
Continue Anway
before the
driver installation is finalized. Confirm it with
Finish
(as shown on the following two pictures).
You can now finally click
Next
on the
ESI DuaFire Audio Driver Setup
dialog. The installation is
now finished. To confirm this, please check if the ESI icon is displayed in the taskbar notification
area as shown below.
If yes, the driver installation has been completed successfully.
8
