background image

ESI Dr. 

DAC 

prime

 

 

12

 

- standby/power on switch 
  - standby (red)  
  - power on (blue)  

 

- S/PDIF & USB input bypass / 192kHz upsampling: 2 position toggle switch  

 

- multi-colored LED display 
  - MUTE (red)  
  - NO SIGNAL (orange) 
  - NON-PCM (pure green) 
  - PCM (pure green) 
  - 192kHz upsampling (pure blue)  

 

- DC 9V~24V wide range power input 

 

- 12V / 1.5A DC adapter included

 

5. General Information 

5.1 Trademarks 

ESI, Dr. DAC, and Dr. DAC prime are trademarks of ESI Audiotechnik GmbH. Windows is a 
trademark of Microsoft Corporation. Other product and brand names are trademarks or registered 
trademarks of their respective companies. 

5.2 The FCC and CE Regulation Warning 

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two 
conditions : (1) this device may not cause harmful interference, and (2) this device must accept any 
interference received, including interference that may cause undesired operation. Caution: Any 
changes or modifications in construction of this device with are not expressly approved by the party 
responsible for compliance, could void the user's authority to operate equipment.  

Note: This equipment has been tested and found to comply with the limits for a Class A digital 
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable 
protection against harmful interference when the equipment is operated in a commercial 
environment. This equipment generates, uses, and can radiate radio frequency energy and, if not 
installed and used in accordance with the instruction manual, may cause harmful interference to 
radio communications. Operation of this equipment in a residential area is likely to cause harmful 
interference in which case the user will be required to correct the interference at his own expense. If 
necessary, consult an experienced radio/television technician for additional suggestions. 

5.3 Correspondence 

For technical support inquiries, contact your nearest dealer, local distributor or ESI support online at 
www.esi-audio.com. 

5.4 Disclaimer 

All features and specifications subject to change without notice. 

Parts of this manual are continually being updated. Please check our web site www.esi-audio.com 
occasionally for the most recent update information. 

Summary of Contents for Dr. DAC prime













Reviews: