6xx Series IPPhone
www.escene.cn/en/
Escene Communication Co.,Ltd
Audio
The IP phone supports the following voice codes: G.722, G.711A, G.711U, G.723, and G.729A.
You can enable/disable the desired codes via Web interface. Please contact your system
administrator for more details about the codes.
To enable/disable the codes:
1) Choose “Audio>Tone”, you can modify “Dial Tone, Ring Volume”
2) Choose “Output volume”, you can modify “Handset Volume, Speaker Phone Volume, Headset
volume”
3)Choose “Input Volume ”,you can modify volume“ Handset Mic Volume, Speaker Phone Mic
Volume, Headset Mic Volume”
4)Choose “Voice codec” you can modify “payload Length”, normally is 20ms.
5)Choose” Ring”, you can delete which you don’t want to use.
6)Choose “Upload Ring”, you can upload the music which you like, but upload G729 less than
30k.
7)Choose “Audio Codec”, Use the navigation keys to highlight the desired one in the
Enabled/Disable Codes list, and press the
/
to move to the other list.
8)Choose Submit to save the change.
Of course, you can control the voice bulk in this choose.
