9910045 RevG April 2021
8. Install Deflectors*
PAGE
18
8.1
* Consult Sheet Title: Ballast Layout
–
XX in the Racking Construction Set for deflector requirement. Each Array will specify required Deflectors per array.
ALERT:
When forecasted wind gusts exceed 25%
of the wind speed listed in the site criteria table
of the Racking Construction Set, Deflectors must
be installed on all mounted modules to avoid
possible system damage.
Center Deflector on module
for all non edge modules
Tip:
On array edge Deflectors should be
installed flush to module/array edge.
Tip:
Adjacent Deflectors will overlap
(adjacent deflector not shown).
Place the bottom edge of the Deflector in the
Deflector Seat near the bottom of the Tilt
Arm.
Fasten to Tilt Arm with bolt and tighten to
6 ft-lb
.
Deflector
Seat
