9910045 RevG April 2021
7. Install Module High Side
PAGE
16
DO NOT REST MODULE
BACKSHEET ON TILT ARM
Tip
: Use two hands when engaging Lock
Claw to ensure correct installation.
LOCK CLAW
UNEVENLY
ENGAGED
LOCK CLAW
NOT FULLY
ENGAGED
Tip:
See
Appendix I
for Lock Claw
reset method.
Tilt Arm
Tongue
Lock Claw
Rotate module down and rest the module
frame on the top of the Tilt Arms.
Tip:
Make sure the Tilt Arms are fully
raised.
7.1
Support module while carefully
rotating the Tilt Arm just
enough to rest the module
frame on the Lock Claw tongue.
7.2
Pull the Tilt Arm forward until the Lock
Claw is fully engaged onto the module
frame flange.
7.3
Scan here for
module high
side installation
video
