ESD VME-PMC-CADDY/2, Hardware Manual

Page: 34 / 43

Connector Assignment
Hardware Manual • Doc. No.: V.1915.21 / Rev. 1.0
VME-PMC-CADDY/2 Page 34 of 43
5.6.3 Assignment VMEbus P0 at ‘-32P2’ Option
Pin Row f Row e Row d Row c Row b Row a
1 GND - - GND - -
2 GND - - GND - -
3 GND RXS2 TXS2 RXS1 TXS1 GND
4 GND I/O201 I/O202 I/O203 I/O204 I/O205
5 GND I/O206 I/O207 I/O208 I/O209 I/O210
6 GND I/O211 I/O212 I/O213 I/O214 I/O215
7 GND I/O216 I/O217 I/O218 I/O219 I/O220
8 GND I/O221 I/O222 I/O223 I/O224 I/O225
9 GND - - - - -
10 GND - - - - -
11 GND - - - - -
12 GND I/O226 I/O227 I/O228 I/O229 I/O230
13 GND I/O231 I/O232 I/O101+I/O233 I/O102+I/O234 I/O103+I/O235
14 GND I/O104+I/O236 I/O105+I/O237 I/O106+I/O238 I/O107+I/O239 I/O108+I/O240
15 GND I/O109+I/O241 I/O110+I/O242 I/O111+I/O243 I/O112+I/O244 I/O113+I/O245
16 GND I/O114+I/O246 I/O115+I/O247 I/O116+I/O248 I/O117+I/O249 I/O118+I/O250
17 GND I/O119+I/O251 I/O120+I/O252 I/O121+I/O253 I/O122+I/O254 I/O123+I/O255
18 GND I/O124+I/O256 I/O125+I/O257 I/O126+I/O258 I/O127+I/O259 I/O128+I/O260
19 GND I/O129+I/O261 I/O130+I/O262 I/O131+I/O263 I/O132+I/O264 do not connect
95-pin I/O connector according to IEC 1076-4-101
Description of the signals of P0:
RXSy, TXSy ... Serial interfaces 1 and 2 (y = 1, 2), physical layer RS-232
(These signals are bridged with the signals of the same name of connector X1940 in the
front panel. Do not use at the same time!)
I/O201 ... I/O232 ... I/O-signals of PMC-Slot 2 (J24)
I/O101+I/O233 ...
I/O132+I/O264 ... bridged I/O-signals of the PMC-slots 1 (J14) and 2 (J24)
do not connect ... Do not connect this pin.
- ... This pins is not connected on the board.