Appendix InRailBus (Option)
8.3.1 Connecting Power Supply and CAN Signals to CBX-InRailBus
To connect the power supply and the CAN-signals via the InRailBus, a terminal plug (order no.:
C.3000.02) is needed. The terminal plug is not included in delivery and must be ordered separately
(see order information).
Figure. 15:
Mounting rail with InRailBus and terminal plug
Plug the terminal plug into the socket on the right of the mounting-rail bus connector of the
InRailBus, as described in Figure 15. Then connect the CAN interface and the power supply
voltage via the terminal plug.
8.3.2 Connection of the Power Supply Voltage
NOTICE
It is
not permissible
to feed through the power supply voltage through the CBX station
and to supply it to another CBX station via 24V connector! A feed through
of the +24 V power supply voltage can cause damage on the CBX modules.
Figure. 16:
Connecting the power supply voltage to the CAN-CBX station
Page 34 of 38
Hardware Manual • Doc. No.: C.2920.21 / Rev. 1.4
CAN-PN
