CAN-AIR/2 Configuration
4.6 CAN-Identifier Filtering and -Mask Setting
Figure 22:
Bridged Identifiers
In the field
Bridged Identifiers
it is possible to define different transmission filters for the
transmission (via RF-Channel) of 11-bit and 29-bit identifiers.
The settings (default) shown in the figure above allow the transmission of all 11-bit and 29-bit CAN
identifiers; a transmission-filtering is not proceeded.
4.6.1 11-Bit Identifier
By means of the buttons
Add
and
Del
identifier ranges, which are specified in the input fields
above the buttons, can be added or deleted.
To add a value or range enter the first and last value of the range in the
input fields and click the button
Add
.
The identifiers will be shown in the list of 11 bit identifier.
To delete identifiers from the list double click the identifier range in the
list. The values are shown in the input fields then and can be deleted
with the
Del
button.
The values must be entered in the input fields as hexadecimal values
with „0x“ as prefix. Otherwise the entries are interpreted as decimal
values but shown as hexadecimal values in the filter field.
(Example: 2047
≙
0x7FF, 100
≙
0x64)
Figure 23:
11 Bit Identifier
Page 26 of 53
Hardware Manual • Doc. No.: C.2067.21 / Rev. 1.5
CAN-AIR/2
