Technical Data
3. Technical Data
3.1 General technical Data
Ambient temperature
0...50 °C
Humidity
90 %, non-condensing
Supply voltage
via PCI-bus,
Nominal voltage / current (typ., at 20 °C):
5 V ±5%
0.55 A (1x CAN)
0.7 A
(2x CAN)
Connectors
X100 (Card Edge)
- PCI-Bus
X400 (DSUB9/male)
- optional CAN-Net 1
X401 (DSUB9/male)
- CAN-Net 0
The following connectors are only used for programming or test
purposes:
X201 (10-pin socket connector) - BDM-interface
X501 (5-pin plug connector)
- ISP-programming
Dimensions
174.57 mm x 106.68 mm
Weight
< 200 g
Table 1:
General technical data of the module
3.2 PCI-Bus
Host-Bus
PCI bus according to PCI Local Bus Specification 2.1
PCI bus width
32 bit
Controller
PLX 9050
Interrupt
interrupt signal A
Slot position
no restrictions for the position of the CAN-PCI/331 on the PCI bus,
PCI bridges are tolerated
Board dimensions
compatible with all 'short' PCI-card slots
Connector
PCI-card edge connector
Table 2:
PCI bus data
Page 10 of 27
Hardware Manual • Doc. No.: C.2020.21 / Rev. 1.6
CAN-PCI/331
