![background image](http://html1.mh-extra.com/html/escort/redline/redline_owners-manual_2426323002.webp)
Quick Reference Guide
Rear Laser Port
Receives laser signals from behind the
vehicle.
Power Jack
Plug the power cord into this connector.
Earphone Jack
Accepts standard 3.5mm earphone.
VOLUME/MUTE Button
Briefly press this button (below the
display) to silence the audio for a specific
alert. (The audio will alert you to the next
encounter.)
Sensitivity Button (SENS)
Switches between Highway, Auto, and
Auto NoX settings. In general, we
recommend the Highway for the best
performance.
Alert Lamp
Indicates radar or laser alert.
Preferences
RedLine is ready to go out of the box, just
plug it in and turn it on. But you can also
easily change 8 features for your
preferences.
Radar Antennae and Laser Lens
The rear panel of your RedLine should
have a clear view of the road. For the
best performance, do not mount the
RedLine directly behind windshield
wipers or tinted areas.
Alphanumeric Display
RedLine’s display will show Highway,
Auto, or Auto NoX as its power-on
indication. If you prefer, you can choose
other power-on indications.
During an alert, the display will
indicate radar band, and a precise bar
graph of signal strength.
NOTE: In the Dark Mode the
display will not light during an alert.
To begin using your RedLine,
just follow these simple steps
1
Plug the small end of the power cord
into the side jack of the detector, and
plug the large end of the power cord
into your car’s lighter socket.
2
Mount RedLine on your windshield
using the supplied windshield Mount.
3
Press the PWR
button,
located on the left side of the control
panel, to turn RedLine on.
4
Press and hold the VOLUME/MUTE
button to adjust the volume level.
Please read the manual to fully understand
RedLine’s operation and features.
QuickMount Slot
Insert RedLine’s adjustable Windshield
Mount into this slot.
QuickMount Button
Press the release button and slide the
Windshield Mount into one of its four
locking positions.
Power
Press the PWR
button to turn
RedLine on.
Volume
Press and hold the VOLUME/MUTE button
to adjust the alert volume level.
AutoMute
RedLine’s patented AutoMute
automatically reduces the volume level of
the audio alert after a brief period. If you
prefer, you can turn AutoMute off.