The LPT30BRD is intended for use as an electrical transfer switch to automatically switch multiple
sources (from one to another), i.e. switching from shoreline to generator power.
The LPT30BRD is primarily designed for installation in conjunction with a generator
having a rated output of no more than 4.5KW and an external power cord having a rated output of
no more than 120VAC, 30A, 1PH, 60HZ.
CONTACTORS
:
General purpose DPDT 30 Amp relay
RELAY COIL
:
110VDC, 2 Watts
PHYSICAL SIZE
:
8 1/2” X 8 1/2” X 4 1/2”
KNOCKOUTS
:
Assorted
TIME DELAY
:
Custom time delay, 30 seconds nominal.
WEIGHT:
6.60 lbs
Can be bypassed for instant switching.
CAUTIONS: ** INSTALL VERTICALLY OR HORIZONTALLY IN A DRY,
ACCESSIBLE AREA.
** MAXIMUM SERVICE 120VAC, 30AMPS SINGLE PHASE: MUST
BE
USED
WITH
A
CIRCUIT
DISTRIBUTION PANEL HAVING A
MAIN BREAKER RATED 30AMPS-1 POLE OR SMALLER.
SUITABLE FOR INSTALLATION IN CONJUNCTION WITH
POWER SUPPLIES HAVING RATED OUTPUTS NO LARGER
THAN
120VAC,
30AMPS.
WARRANTY:
The manufacturer warrants that
this product shall be free from defects in
material and workmanship for one year (twelve months) from date of purchase or eighteen months
after date of manufacture, whichever is less. If, after our inspection, a defect is revealed, the unit will
be repaired and returned, at our discretion. We will accept up to 1/2 hour (30 minutes) labor for the
unit to be changed out or $18.00, whichever is less. This warranty shall not apply to any product that
shows evidence of neglect, misuse, improper installation, or that has been repaired or altered by any
other party other than this company. Proof of purchase may be required.
LPT30BRD INSTALLATION
HOT
NEU.
HOT
NEUTRAL
HOT
NEU.
COIL
TIMER BOARD PRO-
VIDES 30 SECOND
DELAY, BYPASS FOR
INSTANT TRANSFER
.
4016 Quartz Drive
Santa Rosa, CA 95405
Phone: 707 539-9003
Fax: 707 539-5212
Email: [email protected]
Web www.generatorjoe.NET