5
1.800.352.9852 • [email protected] • www.esco.net
Trolley Jack [2 & 3 Ton Style] Model #90520 𖆙
OPERATION -
LIFTING
:
1. Prior to operating the jack, remove any accumulated air from the system below:
Pull the handle and turn it counterclockwise while held in the below position, pump the jack
several times to ensure internal lubrication and bleed the accumulated air from the system.
2. Refer to the vehicle manufacturer owner’s manual to locate approved lifting
points on the vehicle. Center jack saddle under lift point.
3. Jack(s) are fitted with a foot pedal that gives a faster approach to the load.
4. Pump handle full stroke until load reaches desired height.
5. Transfer the load to appropriately rated jack stands.
OPERATION -
LOWERING
:
1. Raise the vehicle and clear the jack stands.
2. Pull up the handle up then turn the handle counter-clockwise. The handle is a
self-return, giving full control of descent of jack. Hold the handle until the jack is
back to the initial position.
Foot Pump
Handle Pump
Full Control Descent Function of Handle
