REV0
620
ITEM
PART
NO
NO.
NO.
REQ’D
DESCRIPTION
1
•
TO-100-RA
1
Cylinder (Includes trunion [item 3])
2
•
TO-100-18
1
Trunion
3
TO-100-17
4
Lock Washer
4
TO-100-16
4
Hex Nut
5
TO-100-
8
1
Tie Bolt
6
TO-100-6R
1
Side Plate (right)
7
TO-100-15
2
Sq. Hd. Set Screw
8
TO-100-1R
1
Bottom Clamp Jaw (right)
9
TO-100-2R
1
Top Clamp Jaw (right)
10
•
TO-100-20
1
Set Screw
11
∆
TO-100-23
6
Wedge
12
TO-100-11
1
Spring
13
•
TO-100-19
1
Spade
14
TO-100-11
2
Spring Pin
15
TO-100-9
1
Clamp Jaw Pin
16
TO-100-7
2
Hinge Pin (see 202825)
17
TO-100-5
1
Spacer
18
TO-100-3
2
Center
19
TO-100-14
1
Hand Screw
20
TO-100-4
1
Swivel Nut
21
TO-100-2L
1
Top Clamp Jaw (left)
22
TO-100-1L
1
Bottom Clamp Jaw (left)
23
TO-100-6L
1
Side Plate (left)
24
TO-100-12
1
Stop Screw
25
TO-100-13
1
Spacer
26
•
TO-100-44
1
Adapter
SAFETY PRECAUTIONS
Follow the tire manufacturer’s instructions and the vehicle manufacturer’s instructions to deflate, demount, mount, and inflate tires.
If the following procedure does not apply to your specific rim, contact the rim manufacturer for the correct procedure. A contact the
United States Department of Transportation, Washington DC 20594 for the publication “Multipiece Rim/Wheel Matching Charts.”
DANGER
: To help prevent the possibility of serious personal injury or death.
•
Do NOT use the Bead Breaker without reading and understanding the following safety precautions and operating instructions.
•
Wear safety glasses at all times.
•
Only trained professional technicians who are familiar with this type of equipment and its correct usage should use the Bead Breaker.
•
Use hardwood blocks under the jack regardless of the type of surface. Crib the vehicle with blocks while raising it.
•
Stand to one side when applying hydraulic pressure. The Bead Breaker creates an extremely high force at a moderate hydraulic pressure; if
the Bead Breaker slips off the flange, it could cause serious injury or death.
•
NEVER
hammer on an inflated or partly inflated tire/rim assembly.
•
NEVER weld, heat, brase, or rework rim components that are broken cracked or damaged. Replace bad parts with
new or undamaged used parts of the same size and shape. If you are in doubt, contact the wheel distributor or
manufacturer.
•
Do NOT weld on an inflated tire/rim assembly because an explosion could occur.
•
Always use a safety cage or safety chains when you are inflating a tire.
Parts List and Operating Instructions for
Bead Breaker
Model 10104
∆
Not included with 10215 or 10216
assembly.
•
Indicates parts in 10216 ram assembly.
Balance of parts not indicated with (
∆
or
•
) are included in 10215 frame assembly.