ESCO Technologies ETS-Lindgren HI-6006, User Manual

Page: 27 / 140

ets-lindgren.com Maintenance 27
6. A single connector attaches the two boards together. Withdraw the two
boards from the housing at the same time. The boards should easily
slide out of the tracks.
7. Detach the two boards by carefully separating them at the connector,
avoiding damage to the pins.
8. Replace the four AAA rechargeable NiMH batteries, orienting the
+/- ends as indicated.
Note: Recycle the used batteries, or dispose of them safely and
properly. Many cities collect used batteries for recycling or disposal.
You may contact your local waste disposal agency for information
on battery recycling and disposal.
9. Reattach the two boards at the connector.
10. Slide the two boards into the correct tracks inside the housing, and
carefully push them until they are completely recessed.
11. Replace the bottom of the housing, avoiding damage to the power
button wires.
12. Replace and tighten the four screws into the bottom of the housing.
13. Replace the two nuts removed in step 3; one on each fiber optic
connector.