ESCO Technologies ETS-Lindgren EMControl 7006-001, User Manual

Page: 79 / 91

ets-lindgren.com EMControl Command Set 79
*ESE
Description: Set Standard Event Status Enable Register. Causes changes in
the contents of the Standard Event Status Enable Register.
Requires an integer argument in binary form to set the register.
The bits of the argument correspond to the bits of the Standard
Event Status Register. Setting a bit in this register allows the
corresponding bit in the Standard Event Status Register to cause
the Event Status Bit in the Status Byte Register to be set.
Devices: Turntables, towers
Syntax: *ESE XXX

XXX : Integer value representing eight-bit binary number
0
–255
Response: no response, or an error (error number)
Example: Write sd*ESE 16\n : Allow an Execution Error to set the ESB
See Also: *ESE? , *STB?