ESCO Technologies ETS-Lindgren EMControl 7006-001, User Manual

Page: 67 / 91

ets-lindgren.com EMControl Command Set 67
SS#?
Description: Queries a preset speed setting for a variable speed device.
Devices: Turntables, towers
Syntax: SS#?

# : A value from 1
–8 to select the preset speed register to
query
Note: There can be no white space between the command, the
number, and the question mark (?).
Response: <speed setting> : Value between 0 (minimum) and
255 (maximum) speed
Example:

Write sdSS7?\n : Query speed preset #7

Read response

Response is 127\n : Preset 7 is set to half max speed
See Also: S# , S? , SS#
ST
Description: Causes device motion to stop.
Devices: Turntables, towers
Syntax: ST
Response: OK , or an error (error number)
Example: Write sdST\n : Stops device motion
See Also: CC , CW , DN , SC , SK , UP