AVT-1
®
User Manual Rev. 1.8
9
The table consists of a sturdy frame and a tabletop in stainless steel and glass. The
AVT platform is located in the middle of the tabletop and it is floating on the AVT mech-
anism.
The anti-vibration mechanism works as a passive damping device and only partially
damps the vibration that is generated on the AVT platform itself.
The microscope must be placed on the anti-vibration float.
In all buildings, floors vibrate at low frequencies that may affect the performance of
high-magnification microscope. The effects of vibration can be greatly reduced by in-
stalling a system that isolates the microscope area. The degree of improvement varies
between instruments and locations, depending on the amplitude and frequency of floor
vibrations.
This product does not carry a CE mark. Only those product categories that are subject
to specific CE marking directives are required (and allowed) to carry CE marking. There
are no such categories or directives that would include a non-electrical anti-vibration
table as AVT-1
®
. The product is manufactured under ISO 9001 Quality Management
System.
Personal Protective Equipment (89/686/EEC) and Machine Directive (2006/42/EC) is
not applicable for AVT-1
®
.
4 Accessories supplied
• 1 manual
• 1 level
• Cable attachments
• Gloves for installation
5 Safety symbols and labels
AVT-1
®
has a label for type which is placed on the upper left-hand side cross bar. User
labels are shown below.
