Escient Fireball E-2, User Manual

Page: 136 / 369

FIREBALL Advanced Users Guide WD041-1-1
10/26/2004
Page 30 of 70
6325 Digital Way Indianapolis, IN 46278 317.616.6789 phone 317.616.6790 fax www.escient.com
Restore Factory Defaults
The Restore Factory Defaults feature is used to restore the FireBall system to its original
factory settings. This allows you to completely erase all user preferences and settings and
reconfigure the unit for the first time.
Since this is a destructive feature, two levels of confirmation dialogs are used to confirm that
you really wants to do this.
Once the Restore Factory Defaults feature is initiated, the user will not be able to stop the
process and all of their settings, music, and preferences will be deleted and the FireBall will be
restored to it’s original software version. You should perform a manual Software Update after a
Restore Factory Defaults to update the FireBall to the most recent software version.
Force Re-Registration
The Re-registration function will reset the internal registration to the default settings, force the
unit to reboot, and run the Quick Start configuration software.
Do not perform a re-registration unless instructed to do so by Escient Technical Support!
Upon power up, you must complete the Quick Start registration process again, which will in
turn cause the unit to re-register with the Escient Internet servers, at the end of the process.
An internet connection is required to complete the re-registration process.