FIREBALL REMOTE CONTROL GUIDE WD049-1-2
2/23/2007
6640 Intech Blvd. Suite 250 Indianapolis, IN 46278 317.616.6789 phone 317.616.6790 fax www.escient.com
<< Code Set >>
Æ
9
Æ
7
Æ
7
The remote will blink two times, pause, then blink two more times after successful completion
of the programming sequence. There will be 2 blinks if no EEPROM or EEPROM is bad. The
remote will time out after 10 seconds during programming.
Code Lock/Unlock for Specific Mode (982)
After a valid code has been set, the code for a specific mode will be locked and unlocked as
follows:
Mode
Æ
<< Code Set >>
Æ
9
Æ
8
Æ
2
The remote will blink two times upon being locked and blink 4 times when unlocked.
The remote will time out after 10 seconds during programming.
Step and Set and Mode Reassignment will not be allowed when the code has been
locked.
