CC800 IPPhone
www.escene.cn/en/
Escene Communication
57
Appendix
：
：
：
：
Auto Provision
Pre-configuration on TFTP/HTTP/HTTPS/FTP Server
When the software or kernel auto-provision is enabled and want to run, IP Phone will
check the software and kernel version at first, so we need make some
pre-configuration on the provisioning server.
Auto Provision for Software:
1.
Create a notepad file named“
FD000X00.cfg
”(the “X” is decided by the model of
the IP phone you are using, for example, the file name is “FD000800.cfg”);
2.
Open the notepad file “FD000X00.cfg” and write the new software name in it, for
example,
S2_CC800_MD5_version1.0.5.4-2523
Write down the new version you want to upgrade and save it on your
provisioning server.
*Please note that if the version is not older than (and same as) the one on your phone,
auto-provision of your software would be not available.
3.
After it, upload the new software to the TFTP/HTTP/HTTPS/FTP provisioning
server and complete the pre-configuration steps.
Auto Provision for Kernel:
1.
Create a notepad file named“
KD000X00.cfg
”(the “X” is decided by the model of
the IP phone you are using, for example, the file name is “KD000800.cfg”);
2.
Open the notepad file “K000X00.cfg” and write the new kernel name in it, for
example,
K2_uImage_100N_v2.6.3
Write the new version you want to upgrade and save it on your provisioning
server.
*Please note that if the version is not older than (and same as) the one on your phone,
auto-provision of your kernel would be not available.
3.
After it, upload the new kernel to the TFTP/HTTP/HTTPS/FTP provisioning
server and complete the pre-configuration steps.
Configuration files on TFTP/HTTP/HTTPS/FTP Server
Name of configuration file:
The configuration file on the provisioning server is named as the MAC address of IP
phone itself. Escene’s IP phones support two different configuration files for
www.InternetVoipPhone.co.uk | [email protected] | 0800 088 48 46
