Escene ES620 User Manual Download

Page: 71 / 87

ES620 IPPhone

www.escene.hk

Escene Communication

Default Value: <blank>

Examples:

￠

o=UNIVERSITY OF NEW ORLEANS,c=US

￠

o=SFU,c=CA

￠

dc=escene,dc=cn

3.2.6 User Name

Description: This setting specifies the bind “Username” for LDAP servers.

Most LDAP servers allow anonymous binds in which case the setting can be left

blank. However if the LDAP server does not allow anonymous binds, you will need to

provide the Username and Password allowed to query the LDAP server.

Default Value: <blank>

3.2.7 Password

Description: This setting specifies the bind “Password” for LDAP servers. Escene

phones use “simple” authentication scheme for bind requests. This setting can be left

blank in case the server allows anonymous binds. Otherwise you will need to provide

the Password along with the Username in order to access the LDAP server.

Default Value: <blank>

3.2.8 Max.Hits(1~32000)

Description: This setting specifies the maximum number of search

results to be returned by the LDAP server. If Max.hits is 0 or blank the

LDAP server will return all search results. Please note that a very large value of the

“Max. Hits” will slow down the LDAP lookup, therefore the setting

should be configured according to the available bandwidth. The default

value for this setting is blank.

Default Value: 50

3.2.9 LDAP Name Attributes

Description: This setting can be used to specify the “name” attributes of each record

which are to be returned in the LDAP search results. This setting compresses the

search results, as the server only returns the attributes which are requested

by the Escene phone. The setting allows the user to configure multiple

space separated name attributes. Please consult your system administrator

regarding which name attributes are to be configured.

Summary of Contents for ES620
























































































Search results

Summary of Contents for ES620

Reviews:

Related manuals for ES620

Brands by name

Popular brands

Escene ES620, User Manual

Search results

Summary of Contents for ES620

Reviews:

Related manuals for ES620

Brands by name

Popular brands