Escene ES620 User Manual Download Page 72

Page: 72 / 87

ES620 IPPhone

www.escene.hk

Escene Communication

Valid Values: Space separated name attributes, see examples below.

Default Value: <blank>

Examples:

￠

cn sn displayName

Requires “cn”, “sn” and “displayName” fields for each LDAP record.

￠

givenName

Requires “givenName” field for each LDAP record.

￠

vorName nachName

Requires “vorName” and “nachName” fields for each LDAP record.

3.2.10 LDAP Number Attributes

Description: This setting can be used to specify the “number” attributes of each

record which are to be returned in the LDAP search results by the LDAP server.

This setting compresses the search results, as the server only returns the attributes

which are requested. The user can configure multiple space separated number

attributes by using this setting. Please consult you system administrator regarding

which number attributes are to be configured.

Valid Values: space separated number attributes e.g. telephoneNumber Mobile ipPhone

Home

Default Value: <blank>

Examples:

￠

Mobile telephoneNumber ipPhone

Requires “Mobile”, “telephoneNumber” and “ipPhone” fields for each LDAP record.

￠

Home Private Office

Requires “Home”, “Private” and “Office” fields for each LDAP record.

3.2.11 Protocol

Description: Protocol is the protocol version for the phone when send the bind request to

the server. Please make sure your LDAP server support version 3/2 bind request.

Valid Values: version 3/version 2

Default Value: version 3

3.2.12 Search Delay(ms)(0~2000)

Description: This setting is for configuring the delay display time after search.

Valid Values: 0~2000

Default Value: 0

3.2.13 LDAP Lookup for Incoming Call

Summary of Contents for ES620
























































































Search results

Summary of Contents for ES620

Reviews:

Related manuals for ES620

Brands by name

Popular brands

Escene ES620, User Manual

Search results

Summary of Contents for ES620

Reviews:

Related manuals for ES620

Brands by name

Popular brands