Escene ES22 User Manual Download Page 56

Page: 56 / 70

ES220 IPPhone

www.escene.hk

Escene Communication

3.2.13 LDAP Lookup for Incoming Call

Description: This setting can be used to enable calling line identification

using LDAP. When the setting is turned

“

Enable

”

, the phone performs an LDAP number search for the incoming number and

displays the name of the calling party accordingly.

Valid Values: <Enabled>, <Disabled>

Default Value: Disabled

3.2.14 LDAP Sorting Results

Description: This setting is for sorting the search results, if make this option

“

Enabled

”

it will arrange in the first alphabetical of the name order if return the name display; if

only has the number return, it will list in numerical order. Valid Values: <Enabled>,

Default Value: Disabled

3.2.15 LDAP Lookup for PreDial/Dial

Description: This setting can be used to enable call out line identification using LDAP.

When the setting is turned

“

Enabled

”

, the phone performs an LDAP number search for PreDial or Dial status.

Valid Values: <Enabled>, <Disabled>

Default Value: Disabled

3.3 Example for Configuration

You can use the below settings as a starting point and adjust the filter and display attributes

according to your needs.

LDAP Name Filter: (&(telephoneNumber=%s)(sn=%))

LDAP Number Filter: (&(telephoneNumber=%s)(sn=*))

Server Address: 192.168.200.254 #####this setting is relate with the server configuration.

Port: 389 #####this setting is relate with the server configuration.

Base: dc=Escene,dc=cn #####this setting is relate with the server configuration.

User Name: cn=manager,dc=escene,dc=cn #####this setting is relate with the server

configuration.

Password: ***** #####this setting is relate with the server configuration.

Max.Hits: 50

LDAP Name Attributes: cn sn displayName

LDAP Number Attributes: Mobile telephoneNumber ipPhone

Summary of Contents for ES22







































































Search results

Summary of Contents for ES22

Reviews:

Related manuals for ES22

Brands by name

Popular brands

Escene ES22, User Manual

Search results

Summary of Contents for ES22

Reviews:

Related manuals for ES22

Brands by name

Popular brands