o
Fan ON/OFF - This turns on the fan only
o
Water ON/OFF - This activates the pump to add cooling water to the system. If
this button is turned o , your unit simply operates as a fan to circulate air.
o
Dome light ON/OFF
o
Change fan speed (5 speeds)
●
Indicator lights illuminate when the water is low, when the pump is ON, and when the
fan is ON
●
Water fill/drain opposite of the water system. Right = OUT, Left = IN - opposite of the
main water system
●
To winterize this system, first you’ll need to drain the water from your system. Simply
run the unit until the low water indicator comes on and both pumps automatically
shut o . This is recommended when your Fresair will not be in use for an extended
period of time. Any temperatures that are sustained below freezing risk damage to the
unit if the tank contains water.
NOCO Battery Charger
●
If you have the
NOCO Genius 10 Onboard Battery Charger
you will have a printed
manual in the drawer in your galley. You can view a digital version by
●
Just plug your trailer into the shore power port on the driver’s side using a standard
extension cord.
●
The unit has a display that shows when it is charging.
●
A graduated bar chart lights up according to battery level
●
All standard batteries that come with the Escapod should be charged on 12V mode (our
single and double battery systems are wet/flooded)
●
If you upgrade aftermarket to an AGM, Lithium, or other battery type, please consult
the manual for the proper settings
GALLEY
Hatch
●
Check that cam latches are parallel to trim prior to closing, and that there are no
items on the counter too tall or long for the hatch to clear. This protects your locks,
trim, personal items, and the Baltic birch that composes the ceiling of the hatch.
●
These cam latches are the locking mechanism of the t-handles on each corner of the
hatch. Should these get bent or loosen with time adjustment or replacement may be
necessary. To adjust, simply loosen the screw, adjust position, and tighten the screw
into place. Overtightening may strip the fitting. Additionally, using a small drill bit to
8
